Composeal Product Data Sheet 1532
Compotite Corporation Compotite Elastiseal
1. PRODUCT NAME
355 Glendale Blvd.
Los Angeles CA 90026
800-221-1056 Toll Free
800-334-3940 Toll Free Fax
3. PRODUCT DESCRIPTION
Compotite Elastiseal is a new, tough, thermoplastic rubber adhesive/sealant which bonds to a variety of materials including glass, PVC, galvanized pipe, copper, steel, aluminum, rubber, concrete, ceramic tile and most primed and painted surfaces, in both interior and exterior applications. Elastiseals offers higher tensile strength, greater elongation, and greater adhesive strength than many of the moisture-cured urethane sealants now on the market. It also offers better package stability and cures without dependence on humidity. Available in standard 11 oz.
(325 ML) caulking cartridges which may be ordered in any quantity.
4. TECHNICAL DATA
Specific Gravity: 1.2
Flash Point, Seta Flash CC ASTM D3278: 50¡ F
Sag Resistance .625" bead: No sag
Viscosity ASTM D2452: 15-25 seconds @60 PSI
Dry Time (68¡ F, 50% RH) ASTM D1640.125 thick: 10 minutes to touch, 36 hours to through dry
The following tests were performed after drying 21 days at 68¡ F, 50% RH:
Hardness ASTM D2240: 70
Adhesion, Shear, ASTM D1002: 450 PSI
Tensile Strength, ASTM D412: 1400 PSI
Elongation, ASTM D412: 1000%
Flammability, MVBS 302: Pass Low Temperature Flexibility, ASTM C711: No cracking or loss of adhesion
Effects of Heat Aging, ASTM C792: No discoloration or loss of adhesion,
Humidity Resistance, ASTM D2247: No corrosion under sealant or loss of adhesion.
Salt Spray Resistance, ASTM B117: No corrosion under sealant or loss of adhesion.
A. Compotite Elastiseal can be used to bond Composeal membranes to drain flanges and metal flashings and to seal protrusions and penetrations which are made through Composeal membranes.
B. Elastiseal is dispensed using a standard hand or air-powered caulking gun.
C. Dispense in an even bead and be certain to attain full contact between the Composeal membrane and the object to be bonded to.
D. Elastiseal skins over quickly once dispensed from tube, is set to touch in 10 minutes and cures through in 36 hours.
E. Clean up tolls and residue with toluene or xylene. Carefully read and follow instructions on solvent packaging.
6. AVAILABILITY AND COST
Compotite products are available nationwide through an extensive network of stocking distributors and dealers. For the name of the Compotite representative, distributor or dealer nearest you, please call Compotite Corporation.
All Compotite products are warranted to be free of manufacturing defects for one year from date of manufacture.
Once properly installed and cured, Composeal Elastiseal requires no maintenance.
9. TECHNICAL ASSISTANCE
Technical Assistance is available through your local Composeal Representative, or through your local Composeal Representative, or through Compotite Corporation.
10. RELATED REFERENCES
For more information, please refer to the following, available through Compotite Corporation:
A. MSDS Composeal Flexible Vinyl Cement B. Sweets Brochure, Composeal GOLD Membrane C. Sweets Brochure, Composeal Blue Vinyl Shower Pan Liner D. Short Form Specifications, Composeal GOLD Membrane E. Short Form Specifications, Composeal Blue Vinyl F. COM 1801 How to Install Composeal GOLD Membrane G. COM 1802 How to Install Composeal Shower Pan
Los Angeles, CA
Copyright Compotite Corporation 1998