Composeal Aqua Shell Rapid Set

Specifications

• Maximum durability for heavy duty commercial construction and residential installations.
• Low perm rating makes it ideal for continuous commercial steam rooms.
• Exceeds ANSI 118.10 & High Performance ANSI 118.12 for waterproofing and crack isolation.
• Formulated to be used with reinforcing fabric throughout.
• Cures in 2 – 4 hours (at 700 , 50% R.H.) and allows foot traffic in 4 – 6 hours.
• Can be easily applied with trowel, airless sprayer, paint brush or roller.
• Interior and exterior
• Adheres to all common surfaces including concrete, cement backer board, plastic, metal, hardwood, brick, exterior grade plywood (interior only).
• Low VOC

Installation Requirements

Surface Preparation:

All surfaces must be between 40º F (4º C) to 95º F (35º C) and structurally sound (deflection not to exceed 1/360 of the span), dry, clean and free from oil, grease, wax, paint, old adhesives, sealers and curing compounds. Any contaminates which inhibit proper bond must be removed. Substrate preparation should be completed following ANSI A108.01 “

General Requirements:

Subsurfaces and Preparation by Other Trades.” All substrates should be plumb and true, surface deviation should not exceed1/4” in 10’. If product has separated or thickened hard, product should be mixed with a slow mixing drill, not incorporating air. Some separation may occur upon standing, which has no reflection upon the quality of the product.

Reinforcement:

AquaShell RS has been formulated to perform as a waterproof and crack isolation membrane without reinforcing fabric. As a waterproof membrane, manufacturer recommends the use of Composeal 8” reinforcing fabric to ensure maximum protection at joints, cracks, protrusions, dissimilar materials, and drains.