EPS Foam Tileable Shower Slope

Specifications

• Quick and easy to install
• Waterproof – resistant to rot or mold
• Light weight eps foam slope
• Same day install and tiling of surface
• No special training necessary
• Sloped per industry standards of 1/4″ every foot

Installation Requirements

1. Measure and locate the center of shower pan drain.
2. Measure from the center of the drain to the shower corners.
3. Cut pre-slope panels to length. Cut Slopes from the outside edge toward the opposite edge.
4. Cut around drain flange and position all pieces.
5. Secure slope board to sub floor with Waterproof Membrane.
6. Apply waterproof membrane on top of the slope board and up the wall 3” above the curb. Apply fiberglass reinforced mesh while still wet and a second coat of Waterproof Membrane on top of the mesh.
7. Plug the inside of the drainpipe and fill the shower pan with water for 24 hours.
8. Repair leaks before proceeding.
9. Float a 1” mortar bed on top of the cured Latex Polymer Liquid Waterproof Membrane, using a standard floor mud. Let cure 24 hours.