EPS Foam Shower Pan with Integrated Curb and PVC Splash Walls – Coated

Specifications

• Ready to Tile EPS shower pan
• Easy install, and fully waterproof
• Lightweight durable construction
• Custom sizes available
• Splash walls integrate with Compotite Cement Backer board

Installation Requirements

1. Ensure the shower base is clean and the area of install is free of debris.
2. Set the EPS foam pan in place, ensuring it fits snugly against the walls and aligns with the drain. Attach the splash wall securely to the walls.
3. Remove the pan and apply adhesive to the underside of the pan and splash wall, ensuring full coverage. Place the shower pan into place.
4. Press both the pan and splash wall firmly into place, ensuring they adhere securely to the sub floor and walls.
5. Allow the adhesive to cure completely as per manufacturer instructions.
6. Once the pan and splash wall are secure, proceed waterproofing the walls to the shower pan. This should be done with seam tape.
7. Begin tiling the shower floor and walls, ensuring a seamless transition over the pan surface and splash wall.
8. Before you use the shower make sure grout and sealants have cured according to manufacturers instructions.