PVC Curb Over Foam

Specifications

• Easy to install
• Sturdy outside PVC is great to fasten to
• Tile ready, waterproof membrane
• Standard lengths come in 48″ , 60″ and 72″
• Easy to cut to size
• Lightweight and durable
• Comes in different heights
• Easy to cut to size
• Lightweight and durable
• Comes in different heights

Installation Requirements

1. Ensure the shower base is clean and dry. Measure and mark where the PVC curb will sit, aligning it with the walls.
2. Use a saw suitable for PVC to trim the curb to fit perfectly between the walls or corner curb. Double-check measurements for accuracy.
3. Apply a suitable adhesive to the underside of the PVC Curb, ensuring full coverage.
4. Carefully position the PVC curb, ensuring it aligns properly and sits flush with the surrounding area.
5. Press the PVC curb firmly into place, ensuring it adheres securely to the floor, walls or corner of curb. Its sturdy PVC construction provides strength, allowing for items to be fastened to it securely.
6. Allow the adhesive to cure completely as per manufacturer instructions before proceeding.
7. Once the curb is firmly in place, proceed with waterproofing and tiling the shower floor and walls, ensuring tiles seamlessly transition over the curb surface.
8. After tiles are set, grout the joints around the curb surface, wiping away excess grout for a clean finish.
9. Consider applying a waterproof sealant to grout lines and the curb surface for added protection against moisture.
10. Inspect curing of entire surface to ensure the shower is ready to be used.