Compotite Linear Drain ABS Extend-O-Cap

SKU: CLD-EOC

  • Extend 42″ drain to a max 60″ & accommodate for offset plumbing
  • ABS One-Piece Injection Mold Construction
  • Extends 42” linear drain body to maximum of 18.5” total extension
  • Modify drain outlet position to accomodate offset plumbing situations
  • Snaps securely in place

Product Documents

Description

Designed to extend the length of our linear drain body on one or both sides of the drain.  This can be used for offset plumbing situations and installations requiring a longer drain body.  The Extend-O-Cap has a length of 10.25” including the 1” flange. Custom size drain grates are available for special order. Use Multi Purpose Solvent Cement or similar rated for ABS – ABS / ABS – PVS for a strong reliable waterproof seal

Specifications

  • Extend 42″ drain to a max 60″ & accommodate for offset plumbing
  • ABS One-Piece Injection Mold Construction
  • Extends 42” linear drain body to maximum of 18.5” total extension
  • Modify drain outlet position to accomodate offset plumbing situations
  • Snaps securely in place

Installation Requirements

Install using Compotite Weld-Tite Multi-Purpose Solvent Cement or similar

  1. Determine the desired rough length of the drain body including the extra 2” for the flange on each end of the drain. (ie. a 42” drain body has a rough length of 44”). The Extend-O-Cap will add 10.25 inches to the rough length of the drain from where it is cut.
    [a]
    For a 60” drain (62” rough length)- cut 1.25” off each end of the 42” drain body
    [b] For a 58 “ drain (60” rough length)- cut 2.25” off each end of the 42” drain body [c] Make the appropriate adjustments for off set plumbing aiming to have a finished drain at a standard length if possible. (Larger standard sizes (2” less than rough  drain body length) are 48”, 54” and 60”)
  2. Turn the drain body flange down and cut the drain with a chop saw or other tool to the desired length
  3. Apply ABS-ABS solvent cement to the edges of both theExtend-O-Cap and Drain Body to be bonded.
  4. Snap the Extend-O-Cap firmly in place for a watertight seal

Related Products

Email product documents to yourself or colleagues